Filter
Top Products
69
Programming Radio Systems
Programming Motorola Systems
Program System
New System
MOT
Next, rotate the scroll control to select the type of
Motorola system you want to program, then briefly
press the scroll control to select it.
• 800MHz Standard - Use for 800 MHz systems
that use the standard band plan
• 800MHz Splinter - Use for 800 MHz systems
that use the splinter band plan (typically near
international borders)
Note: Splinter systems have frequencies below
866 MHz that end in 0. For example, 851.0250
would be the frequency of a splinter system.
• 900MHz Band - Use for 900 MHz systems
• VHF band - Use for VHF systems
• UHF band - Use for UHF systems
Confirm? Yes=“E”/ No=“.”
Next, refer to the appropriate section to set system-
wide options. For most settings, you can accept the
default. However, for the items in bold, you must enter
information in order for your scanner to scan the
system.
• See “Editing the System Name” on Page 80
• See “Editing the System Quick Key” on Page 81
• See “Setting System Lockout” on Page 81
• See “Setting the System Hold Time” on Page 82
• See “Setting the Channel Delay Time” on Page 82
• See “Setting ID Scan/Search (Trunked Systems
Only)” on Page 83
• See “Editing the Fleet Map (Motorola Systems
Only)” on Page 83 (must be set up for Type I and
Type II Hybrid systems)
• See“Setting the Motorola Status Bit (Motorola Sys-
tems Only)” on Page 84
Menu