Filter
Top Products
73
Programming Radio Systems
Enter a talk group ID
Note: You can enter I-Calls by pressing then the
I-Call number. You can enter the I-Call wild card by
pressing then 0.
Refer to the appropriate section to change a
channel setting:
• See “Editing the Channel Name” on Page 91
• See “Editing the Talk Group ID (Trunked Channels
Only)” on Page 94
• See “Setting Channel Lockout” on Page 96
• See “Deleting Channels” on Page 97
• See “Copying/Pasting Channels” on Page 97
To program another channel within the same group,
press , then repeat the above. To create another
channel group and enter more channels, press
three times, then proceed from “Entering/Editing
Motorola Channel Groups” on Page 72.
Programming EDACS Systems
Program System
New System
EDCS
Confirm? Yes=“E”/ No=“.”
Next, rotate the scroll control to select the type of
EDACS system you want to program, then briefly
press the scroll control to select it.
• WIDE - Use for wideband EDACS systems
• NARROW - Use for narrowband EDACS systems
• SCAT - Use for EDACS SCAT (Single Channel
Autonomous Trunking)
Confirm? Yes=“E”/ No=“.”
Menu
Menu
Menu