Filter
Top Products
~ , ,-......-...........---
Using Auto Recording
The Auto Recordingfeature allowsyou to automaticallytape record
activity from any channel of your scanner. When scanning stops on the
assigned channel,the recorder recordsthe broadcast.
Before using the Auto Tape feature, connect the scanner to a tape
recorder. (See page 6.)
Use these keys:
,?:::{:i:'{:"'::::,\':'?"'~i'<:
~",~~~;:;~'ijj0~
~~"~~~~i~~
mJllBla """+-Uac8OOOXlT
R~~i;::-;~:::
~:~~5~~=~
rl!
lfIJi.
~~
~ <=:)<=:) DATA
1;;'. 6 (-.) im :~
Status, Scan, and Numeric Keys,
Rotary Tuning Controls, Line jack
1. Press(SCAN I.
Bank A P ch 1
482.7625MHz
2. When the scanner stops on a
channel you want to record,
press IMANUAL), then press ~.
Record ch 1
482.7625MHz
Note:You can also select the channel manually.
To select other channelsfor recording, repeat steps 1 and 2.
To recordtransmissions, you need a tape recorder with Remote and
Microphone inputs.
1. Connect the REMOTE jack of your tape recorderto the AUX jack
on the rear of the UBC9000XLT. This can be used to start and
stop your recorder.
2. Put a tape in your recorder, and put it in the Record mode.
3. Press(SCAN I.
41
--.----
------..
l
-
I
I
(
1
1
!
!
I
!
I
I
\
I
I
I
i
(
I
I
I
i
I
!
J