Filter
Top Products
c.
Troubleshooting
If your UBC9000XL T is not performing properly, try the steps listed below.
If you still cannot get satisfactory resultsand want additional information,
or to returnthe unit for service, please call Uniden Customer Service
Division.The address and phone numberare listed in the Warranty.
(at the end ofthis manual)
51
--
~
...,.
~
I
PROBLEM
SUGGESTION
Scanner won't work. Check the connections at both ends of
the AC Adaptor.
Tum on the wall switch of your room.
Move the AC Adaptor to another
wall outlet.
Make sure the power switch is tumed on.
Poor reception.
Check the antenna and its connection.
You may be in a fringe area. This may
require an optional multi-band
antenna. Check with your dealer or
local electronics store.
Scan won't stop.
Adjust the Squelch Control.
Check the antenna connection.
It is possible that none of the
programmed channels are active at the
time. Try the band search.
Scan won't start.
Press the bank key again.
Make sure there are some
programmed channels.
Adjust the Squelch Control.
Search won't start.
Adjust the Squelch Control.
canner won't allow any program
Check the Enter Lock feature.
Inputs
Can't program channel with alpha
Alpha character programming is available
character
up to 250 channels. Make sure the
programmed channel is within that range.