Filter
Top Products
r
Getting Started
Standard
h
240V
ACWallOutlet
DC 13.8V
Jack
Auxiliary Antenna
Jack Jack
Telescoping
Antenna
AC Adaptor!
Charger
(AAD8500U)
J- Plug
Off-On!
Enter-Lock
Switch
FoldingLeg
Base Installation
1. Insert the DC plug end of the AC Adaptor into the DC 13.8Vjack
on the rear panel.
2. Plug the AC Adaptor into a standard 240V AC wall outlet.
3. Plug the Telescoping Antenna intothe "ANT'connector. Extend
the antenna to its full height. For frequencies higher than
406 MHz, shorteningthe antenna may improvethe reception.
4. If you need a better viewing angle,flip the folding legs down to
raise the front of the scanner.
Foruse with an optional external speaker:
Plug the external speaker into the "EXTSP' jack
located on the front of the scanner.
«:: PROG ~ ~ SEND ~ ~ ALPHA:}
~HOLD~
(.SRC J (AUTO.)
For use withan optional tape recorder:
Be sure to use a tape recorderwith
microphone and remote input jacks.
'-- UMIT~
UNE EXTSP
@ @
1. Connectacablefromthe"LINE"jackonthe
front of the scannerto the microphoneinput of a tape recorder.
2. Connect a cable from the RCA-type "AUX"jack on the back of
the scanner to the recorder's "REMOTE"jack.
(See "Using Auto Record," page 41.)
For use withan optional CTCSS ToneBoard:
CTCSS BoardSocket (insidethe unit).See "CTCSSOperation,"page45.
6