Filter
Top Products
<::
J ,._-==--=,",,=--
-==:::::
-
-
-- ~
6. Press CDto store the entry. The channel numberon
the displaystops blinking.
BANK
2
18 125.2500
AIR
HOLD
7.
Ifthat frequency is already stored in another channel,
you will hear a "beep", and the other channel number
will appear on the display.
Ifyou want to store the frequency in the selected
channel (18) as well, press CD again. Or, press 0
twice and enter another frequency for the currently
selected channel. The channel number on the display
stops blinking.
Note: Any frequency already stored in any channel
will automatically be replaced by the new one.
If you try to enter a frequency that is outside of the 9
Bands, you willhear a "beep", and the word "Error"
appears on the display.
I
8.
BANK
2
18
Error
HOLD
Press 0 twice and re-enter the correct frequency.
9. To program another channel, repeat the above
procedures.
Deleti ng a Stored Freq uency
To delete a frequency from a channel:
1. Displaythe channel and frequency to be deleted.
2.
Press CD on the numeric keypad.
Press CD. The current channel is erased, and the
display shows 000.000.
Note: That channel will be skipped during scanning.
3.
15
-. =
J
"