Filter
Top Products
<:
-==
-
Search Frequency Skip.
The scanner may stop at certain frequencies during Search
that you do not want to hear. You can program up to 10 Skip
Frequencies into the UBC 120XL T. When the scanner stops at
one of these frequencies during Sec!rch, press @. That
frequency is now "memorised" and will be skipped during any
Search. The scanner will then search to find other active
frequencies.
Caution: If you attempt to lock out more than 10
frequencies, you will overwrite those frequencies
already stored in the Search Skip Memory.
Programming With SEARCH
The Search feature enables you to rapidly search for active
frequencies within band limits you specify. When an
interesting frequency is found, you can store it in a channel
using the procedure below.
1. Press~.
9.
When Search stops on a desired frequency, press
(HOLD)to stay on that frequency. The channel you
chose above will be blinking on the display.
BANK 2
~ 1'4 /f./ D [; .D D D D
OIrfA/tl"
SRCH HOLD DLY
10. To store the displayed frequency in that channel, press
CD. The channel number on the display stops blinking.
Repeat this procedure to store other frequencies found in the
SEARCHMode.
21
~----.
- --------
F
2.
Usethe keypadto select the channel you wish to store
a frequency in.
3.
Press to accessthatchannel.
4.
Usethe keypadto enter the lowest frequency of the
I
band you wish to search.
5.
Press@.
6.
Enterthe highest frequency ofthe band you wish to search.
7.
Press@.
8.
Press ISRCHI.