Filter
Top Products
=
-
Care and Maintenance
Replacing the Battery Pack
1. Turn the On-OffNolume Control OFF.
2. Turn the scanner over
so you are looking at
the back.
(@@1
@CQ.:.)@
~
3. Press in on the ribbed
area and slide the
Battery Cover down
and off.
(@01
@~@
~
..
4.Carefully unplug the Battery Pack and lift it out of the
case.
5. Carefully plug in the new Battery Pack, observing the
proper polarity. (The RED wire should be on the
right as you plug it in.) Although the plug is keyedto
reduce the chance of inserting it wrong, make sure
the wires are in the correct position before pushing it
in all the way. DO NOT FORCETHE PLUG IN.
22
..~\