Filter
Top Products
Controls and Functions
10 Vidikron Vision 70 Series Owner’s Operating Manual
PRE
L
IMINAR
Y
1. ON / OFF
Use these buttons to turn th
e projector on or off.
2. S
ource Selection Buttons:
COMP 1 (SD Component)
Press to select Component 1 (SD 480i/576i) video input
as the source.
S-VID (S-Video)
Press to select the S-Video input as the source.
VIDEO
Press to select Composite video input
as the source.
COMP 2 (HD Component)
Press to select Component 2
(HD 480p/576p/720p/1080i) video input as the source.
RGB HD
Press to select the Component 2 RGB input.
HDMI
Press to select the HDMI input.
3. Aspec
t Ratio Selection Buttons
Use these buttons to select an aspect ratio directly, as follows:
ANA (Anamorphic)
For viewing 16:9 DVDs or HDTV programs in their
native aspect ratio.
4X3 (Standard 4:3)
Scales the input signal to fit 4:3 displ
ay mode in the center of the screen.
L-BOX (Letterbox)
For viewing LaserDisc movies or non-an
amorphic DVDs on a 4:3 screen.
I-WIDE (IntelliWide)
Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display.
CINEMA
For viewing 2.35:1 sour
ce material.
C-FILL (CineWide-equipped projectors only)
Selects the Cinema Fill aspect ratio, used for viewing 16:9 source material on a 2.35:1
screen.