Filter
Top Products
Operation
Vidikron Vision 70 Series Owner’s Operating Manual 59
PRE
L
IMINAR
Y
Splash Screen Timer: Use the or button to set the Splash Screen Timer. This timer
controls how long the startup (ISF and Vidikron logo) image stays on-screen after you turn on
th
e projector. Select from 5 to 60 seconds, in one-second increments. When finished, press
EXIT.
ISF Enable: Select ISF Enable from the ISF Calibration
menu to control the display of the ISF
logo on the Vision 70 splash screen upon power-up.
You can personalize the Vision 70 splash screen with the projector owner’s name and/or the
installer’s name. For instr
uctions, refer to Appendix A.
Return to User OSD: To exit the ISF Calibration menu, use
the up- or down-arrow keys to
highlight Return to User OSD and press ENTER.
To return to the ISF Calibration menu, select it
from the Main Menu, press ENTER twice, then
press MENU on the remote control. (You do not need to re-enter the passcode.)