Filter
Top Products
Operation
Vidikron Vision 70 Series Owner’s Operating Manual 47
PRE
L
IMINAR
Y
Select Color from the Picture Adjust menu and press ENTER. While looking at the color bar
pattern through a blue filter, adjust the color saturation level
until the outermost (gray and
blue) color bars appear to be a single shade of blue:
Tint: Tint or “hue” is essentially the ratio of red to green in the
color portion of the image.
When tint is decreased, the image appears redder; when it is increased the image appears
greener. To set the tint, select Tint from the Picture Adjust menu and press ENTER. Wh
ile
looking at the color bar pattern through a blue fil
ter, adjust the tint level until the cyan and
magenta color bars (on either side of the green bar) appear to be a single shade of blue.
Like the brightness and contrast controls, the color
and tint controls are
interactive. A change to one may require a subtle change to the other in
order to achieve the optimum setting.
gray
yellow
cyan
green
magenta
red
blue
Note