Filter
Top Products
Installation
14 Vidikron VL-26/VL-32 Owner’s Operating Manual
3.2
Quick Setup
Table 3-1 gives a quick overview of the DView installation process. The sections following this
one provide detailed instructions.
Installation should be performed by a qualified custom video installation
specialist.
Table 3-1. Installation Overview
Step Procedure
For Details, refer to
page...
1 Mount the DView on a wall (optional) 15
2 Connect signal sources to the DView 16
3 Connect external controller to RS-232 port (optional) 21
4 Apply power to the DView 23
5 Change the OSD language 23
6 If using the DView with a PC, adjust PC display properties 23
7 Display calibration: adjust the following for each input,
starting with Component (Input 3 and/or Input 4); save
settings when finished:
• Aspect ratio
• Brightness
• Contrast
• Color level
• Tint
• Input position
26 through 37
Note