ViewSonic PJ1165 Projector User Manual


 
ViewSonic PJ1165 12
Remote Control
About The Laser Pointer
This remote control has a laser pointer in place of a finger or rod. The laser beam works
and the LASER INDICATOR lights while the LASER button is pressed.
Putting Batteries
WARNING
The laser pointer of the remote control is used in place of a finger or rod. Never look
directly into the laser beam outlet or point the laser beam at other people. The laser
beam can cause vision problems.
CAUTION
Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
CAUTION
About the battery
Keep a battery away from children and pets.
Use only the battery specified: two AA batteries.
Do not mix new battery with used one.
Make sure the plus and minus terminals are correctly aligned when loading the battery
(as indicated in the remote control).
Dispose of batteries in accord with environmental laws.
1
Remove the battery cover.
Slide back and remove
the battery cover in the
direction of the arrow.
2
Insert the batteries. Align
and insert the two AA
batteries according to
their plus minus terminals
(as indicated in the
remote control).
3
Close the battery cover.
Replace the battery cover
in the direction of the
arrow and snap it back
into place.