Filter
Top Products
ViewSonic PJ1165 19
Adjusting The Volume
Muting The Sound
Temporarily Blanking The Screen
1
Press the VOLUME button.
As illustrated on the right, a dialog will appear
on the screen to aid you in adjusting the
volume.
2
Use the cursor buttons S/T to adjust the
volume.
3
Press the VOLUME button again to close the dialog and
complete this operation.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
1
Press the MUTE button.
As illustrated on the right, a dialog will appear
on the screen indicating that you have muted
the sound.
2
Press the MUTE or VOLUME button again to
restore the sound.
memo
Even if you don’t do anything, the dialog will
automatically disappear after a few seconds.
1
Press the BLANK button.
The input signal screen will shut off, and a BLANK screen
will appear.
memo
You can set the BLANK screen using the menu. Please
refer to the item “BLANK” of the table of the section
“SCREEN Menu”.
2
Press the BLANK button again to remove the BLANK
screen, and return to the input signal screen.
Cursor
buttons
VOLUME
button
MUTE
button
BLANK
button