Filter
Top Products
ViewSonic PJ1165 22
Multifunctional Settings
Using The Menu Functions
This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT, AUTO,
SCREEN, OPTION and NETW ORK. Each of these menus is operated using the same
methods. The basic operations of these menus are as follows.
1
Press the MENU
button. The menu will
appear on the screen.
2
Use the cursor
buttons S/T to
select a menu, then
press the X (or the
ENTER) button to
progress.
The display of the
selected menu will
appear.
3
Use the cursor
buttons S/T to
select an item, then
press the X (or the
ENTER) button to
progress.
The operation display
of the selected item
will appear.
ex. Turning off the built-in speaker
1) Press the MENU button.
2) Select the “OPTION” using the T
button, then press the X button.
3) Select the “SPEAKER” using the T
button, then press the X button.
4
Use the cursor buttons S/T to operate the
item.
memo
When you want to reset the
adjustment, press the RESET button
during the operation. Note that the items
whose functions are performed
simultaneously with operating (ex.
LANGUAGE, WHISPER, H PHASE etc.)
are not reset.
memo
When you want to return to the
previous display, press the W button or
ESC button.
4) Use the cursor button T to select the
“TURN OFF”.
5
Press the MENU button again to close the
menu display and complete this operation.
memo
Even if you don’t do anything, the
menu will automatically disappear after a
few seconds.
5) Press the MENU button again.
Cursor
buttons
MENU
button
RESET
button
ESC
button
X
/
ENTER
button