Filter
Top Products
20 VISIONEER 6200/6400 SCANNER INSTALLATION GUIDE
Please see the Readme file in the PaperPort directory on your computer’s
hard drive. The Readme file contains additional information that may
help you diagnose problems connecting the scanner.
To reconnect the scanner if it is connected to a parallel port:
1. Right-click the scanner icon with the red X over it.
The shortcut menu appears.
2. Choose Connect from the shortcut menu.
The software finds the scanner and makes the connection.
The scanner icon will no longer have a red X through it, and you’re
ready to begin scanning.
If your scanner is connected to a USB port:
■ See “Checking a Scanner Connected to a USB Port” on page 17 to
test the scanner using Scanners and Cameras setting in the Control
Panel.
If you try all the troubleshooting procedures described above and in the
Readme file and the scanner is not working, see the technical support
card that came with your scanner for technical assistance telephone
numbers. Also visit our web site at www.visioneer.com for additional
technical information.
SCANNING FOR THE FIRST TIME
To scan an item, you simply press the button on the scanner. The
OneTouch software automatically scans an item, uses the color setting,
and selects the PaperPort software as the default destination application.