Filter
Top Products
I
NSTALLING
TO
A
USB P
ORT
5
Part 1: Installing Your
Scanner
I
NSTALLING
TO
A
USB P
ORT
This section of the guide contains instructions for connecting your
Visioneer scanner to a USB port. If you are connecting the 6400
scanner to a parallel port, see “Installing to a Parallel Port” on page 11
for more information.
STEP 1: INSTALLING THE PAPERPORT SOFTWARE
The PaperPort CD includes all the necessary installation files, as well as
PaperPort software files and other software files.
The CD also includes the PaperPort User’s Guide. You can read the guide
from the CD, or print a copy directly from the CD.
To install the PaperPort software:
1. Start Microsoft Windows 98 and make sure that no other
applications are running.
Microsoft Windows 98 is required to connect the scanner to a USB
port.
2. Insert the PaperPort CD into your computer’s CD-ROM drive.
The CD automatically starts.
Note: You must install the PaperPort software before connecting the
scanner to the computer. Otherwise the correct software to run your
scanner will not be installed and it may not scan properly.