Filter
Top Products
24 VISIONEER 6200/6400 SCANNER INSTALLATION GUIDE
When scanning is complete, the status message also shows the
destination application. In the sample below, the scanned image is
being sent to PaperPort.
During scanning, the scan progress window shows a small copy of the
image.
The item appears in the destination application.
CONFIGURING THE ONETOUCH SOFTWARE
You can configure the OneTouch software to scan items at various
settings, and then send the scanned image to a preselected software
application—called the destination application.
To configure the OneTouch software:
1. If the scanner is connected to a parallel port, right-click the
OneTouch icon in the Windows task bar.
If the scanner is connected to a USB Port, in Windows click Start,
and then choose Programs. Click the PaperPort folder, and
choose OneTouch Configure.
The Visioneer OneTouch Configuration dialog box appears.
▼ Note: If the scanner is connected to a parallel port, press and hold
the button on the scanner to display the Visioneer OneTouch
Configuration dialog box.
Scanner Icon