Filter
Top Products
32 VISIONEER ONETOUCH 9120 USB SCANNER INSTALLATION GUIDE
Configuring
You can configure the default scanning settings for:
■ The buttons on the scanner and the button panel
■ The Visioneer Scan Manager Pro application (used when scanning
from the PaperPort software)
CONFIGURING THE BUTTONS
When you first connect your scanner to a computer, the scanner’s
software configures each OneTouch button with appropriate settings. If
you want to change the settings, you can reconfigure the buttons by
selecting new options from the Configuration dialog box.
When you change button settings, the changes are applied to the button
on the scanner as well as the same button on the button panel.
To open the Configuration dialog box from the shortcut menu:
1. Right-click the scanner icon and then select Configure on the
shortcut menu.
2. On the Configuration dialog box, click the tab that corresponds to
the button you want to configure.
Scanner icon