Filter
Top Products
STEP 3: CALIBRATE THE SCANNER 25
To calibrate the scanner:
1. Strobe XP 300 only: Close the scanner’s paper return so the
calibration paper will feed straight through the scanner.
Strobe XP 200 only: Move the scanner’s Paper Return into the Up
position so the calibration paper will feed straight through the
scanner.
2. Insert the calibration page into the page feed.
The scanner grabs the paper and feeds it through the scanner.
The scanner will automatically pass the sheet back and forth several
times.
Do not remove the sheet until calibration is finished.
3. When calibration is complete, the calibration paper will back out of
the scanner.