Visioneer XP 300 Scanner User Manual


 
38 VISIONEER STROBE XP SCANNER USERS GUIDE
SCANNING BASICS
To scan a page, insert the paper face down.
Strobe XP 200 only: insert the paper face up.
Strobe XP 300 only: Your scanner can scan both sides of a page (called
duplex scanning), so either side can be face down because both sides
are scanned.
ADJUST THE PAPER GUIDES
Strobe XP 300 only: Your scanner has Paper Guides on the Page Feed.
Adjust them to the width of the item you’re scanning.
To adjust the Paper Guides slide them toward each other until they
match the width of the item you’re scanning.
Note: Always remove any staples or paper clips from documents
before inserting them into the scanner. Staples and paper clips can jam
the feed mechanism and scratch the internal components. Do not scan
any document with wet correction fluid, labels, stickers or Post-It™
notes on the pages. The correction fluid or glue from the stickers can
leave residue on the lens that is difficult to clean. The residue also
causes lines to occur in the scanned images. If a label, sticker or Post-It
note comes off during the scanning process, the item can get stuck in
the scanner and this will void your scanner’s warranty.