Westell Technologies 2200 Network Router User Manual


 
030-300372 Rev. A 104 July 2003
Westell Dual Connect NAT Router with DMH Technology
User Guide
14.5 Transceiver Statistics
The following settings will be displayed if you select Transceiver Stats from the Troubleshooting menu.
Transceiver Revision The transceiver software version number.
Vendor ID Code The CPE Vendor’s ID code for their chipset.
Line Mode The operational mode. Modes supported are No Mode, Multi Mode, T.1413
Mode, G.DMT Mode, and G.LITE Mode.
Data Path The data path used (either Fast or Interleaved).
PSD/Shaping Factory Default = AUTO
Possible responses are:
ON: Turn on power density
OFF: Turns off power density
Transceiver Information-Down Stream/Up Stream Path
DSL Speed (Kbits/Sec) The transmission rate that is provided by your Internet Service Provider (ISP).
SNR Margin (db) The Signal-to-Noise Ratio (S/N) where 0 db = 1x10
-7
, which inhibits your DSL
speed.
Line Attenuation (dB) The DSL line loss.
Transmit Power (db/Hz) The transmitted signal strength.