Filter
Top Products
030-300372 Rev. A 41 July 2003
Westell Dual Connect NAT Router with DMH Technology
User Guide
Connection Name This field allows you to enter a new connection name of your choice (up to 64
characters).
Account ID Use the same account ID that you used in section 7 if you are connecting to the
same Service Provider. If you have multiple Service Providers, you can enter this
information at this time.
Account Password Use the same account password that you used in section 7 if you are connecting
to the same Service Provider. If you have multiple Service Providers, you can
enter this information at this time.
Service Profile Westell recommends that you use the Default parameter.
Manual Selecting this feature allows you to manually establish your PPP session.
On Demand Factory default = On Demand
Selecting this feature allows the Router to automatically re-establish your PPP
session upon demand.
Always On Selecting this feature allows the Router to establish an “always-on” PPP session
if it goes down.
Time Out Enable Selecting this feature allows you to enable the timeout parameter of your PPP
session, which is set to a factory default of 20 minutes.
Save Password Selecting this feature allows you to save the password for your new connection
profile in your Router so that you will not have to re-enter it in case of a re-boot.
Minutes for Connection Time Out This option allows you to specify the number of minutes that you want a PPP
session to stay active before it is disconnected due to inactivity. (This feature
works if you have selected the Time Out Enable feature explained above.)