Filter
Top Products
CONFIGURING SETTINGS
89
WD MY CLOUD PERSONAL CLOUD STORAGE
USER MANUAL
Firmware
The Firmware page enables you to set up the device to update the WD My Cloud firmware
automatically or to manually check for an update file. The current version number and the
date of last update of the WD My Cloud firmware display.
1. On the Navigation bar, click Settings, and then click Firmware on the left panel.
Auto Update
You can schedule the WD My Cloud device to conveniently check for available software
updates and install them automatically. This is the easiest way of ensuring the WD My Cloud
firmware is current.
Note: After a firmware update installs, the WD My Cloud device reboots. Since a
reboot will affect users' ability to access the cloud, you should schedule
the updates to occur at times when the likelihood of users accessing the
cloud are minimal.
To update WD My Cloud firmware automatically:
1. Toggle Enable Auto Update to ON.
2. From the drop-down lists, specify the frequency (e.g., daily) and time at which the device
should look for an update on the WD website, and if one is available, to automatically
install it and reboot.
3. Click Save.
l