Xerox 180 Printer User Manual


 
2-2 DocuTech 128/155/180 HighLight Color Operator Guide
System components
Optional Components
Inverter Feeder/Stacker and up to 3 Feeder/Stackers
2-Tray Interposer and Finisher (Production publisher
configuration)
NOTE: The initial release of the Production publisher (Interposer
and Finisher) configuration is 180 PPM only and does not support
LCDS & IPDS.
Functional overview
The Xerox DocuTech HLC prints high quality, high resolution
documents in simplex or duplex mode at high production speeds,
from LCDS, PostScript, PCL, and other data streams. The system
can switch between printing different types of data streams
without a need for rebooting or reconfiguring software.
The printer supports:
Duplex printing
Media handling of multiple weights, sizes, and types
Optional modules for enhanced finishing and output to third-
party finishing devices
Optional enabling of a third-party roll feeder
Depending on your configuration: optional high-capacity
feeder/stacker modules, which provide additional feeder trays
and output bins
Depending on your configuration: Interposer/Finisher/Binder
High resolution of LCDS*, PostScript, and PCL data streams
(shown in the following table)
NOTE: *The initial release of the Production publisher (Interposer
and Finisher) configuration is 180 PPM only and does not support
LCDS & IPDS.