Xerox 2400 Scanner User Manual


 
Three ways to scan
4800/2400 Series Installation and User Guide 2-7
3. Click a selection in the Select Configuration list to choose a
new scan configuration for the selected scanner button.
The configurations are preset for the application you select in
the application list. If you select another application, the
configurations are for that application.
If you want to select a configuration prior to scanning, click the
option, [Configure before Scan]. When you press a scanner
button, the Scan Manager Pro dialog box appears first and you
can select a configuration before scanning. See “Using TWAIN
and Scan Manager Pro” on page 2-13.
4. Select one of the Format and Page(s) options for the button.
5. Click [OK].
Now when you press the scanner button, it scans the image
using the new configuration settings and displays the scanned
image in the new destination application.
NOTE: The Configuration dialog box is also available from the
scanner icon on the Windows taskbar. Click the icon to see the
scanner buttons panel. Click a button on the panel with the right
mouse button. (Don’t click with the left mouse button because
clicking with the left mouse button starts scanning.) The
Configuration dialog box appears.
Creating new configurations
You cannot change settings such as brightness or contrast of the
preset configurations. To scan with settings other than those offered
by the preset configurations, you must first create a new
configuration.
To create a new configuration click the [New] button. You can also
click [Copy] to copy a preset configuration, change its settings, and
then save it under a new configuration name.
Adjusting scan settings and page settings
When scanning using a configuration that you created yourself, you
can adjust that configuration’s scan settings and page settings. For
example, if the scanned image is too dark, you can adjust the
brightness of the scan setting.
NOTE: You cannot change the scan settings or page settings for
any of the predefined scan configurations. You can only adjust for
scan configuration that you create yourself. See the section above,
"Creating New Configurations".
To adjust the scan settings and page settings:
1. Display the Configuration dialog box.