Filter
Top Products
INSTALLATION
Use this screen to specify whether you want to modify your
AUTOEXEC.BAT file to load the fax software automatically when
you start your computer.
If you did not accept the default path name C:\PSFAX, skip this
step. You may edit the AUTOEXEC.BAT file later to add the fax
software load commands.
Do one of the following:
• Select “Update the AUTOEXEC.BAT File” to load PSFAX
automatically. Do not select Automatic Loading if you are
installing the software for a network connected printer. Refer
to “Installing fax software on a network” later in this chapter.
• To remove PSFAX from the AUTOEXEC.BAT, select “Skip This
Step Without Changing the AUTOEXEC.BAT File” and press
Enter to continue.
README File Options screen
After you have completed or skipped the Automatic Loading
Option screen, the README File Options screen appears:
The README file contains information updates available after this
operator guide was printed. It is a good idea to read it to see if
it contains information pertinent to your current activity.
Follow these steps to complete the README File Options screen:
1. Do one of the following:
• To print the README file, select “Print the README File,”
and press Enter.
• If you do not want to print or read the file, select “Skip
the README File and Continue with the Next Screen,”
and press Enter. You may read the README file later
with a text editor, or by running the installation program
again from your hard disk, as described in “Changing the
fax software basic settings,” in the “Administering the fax
software” chapter.
The last screen to appear informs you that the installation is
complete and provides instructions on how to activate the
fax software.
2. Press Enter to return to the MS-DOS prompt.
1-10 XEROX MRP FAMILY FAX MODEM FOR MS-DOS OPERATOR GUIDE