Filter
Top Products
PREINSTALLATION
obstruction that hangs below the ceiling) throughout the
entire area
• 24 inches/610 mm of exclusive operator area in front of each
component.
Shared space
It is best to provide the full amount of clearance space around
your LPS. It is sometimes necessary to have shared space
between components, such as between the printer and the
system controller, or between another printing system.
Figures 1-6 and 1-7 illustrate two possible configurations of
shared space. In the first illustration, two printers are back-to-
back. Because there is no operator area to be concerned with,
the entire 36 inches of general service space may be shared.
Figure 1-6. Back to back shared service area space
Figure 1-7 shows the two printers facing each other. The printers
share 12 inches/305 mm of the general service space but not the
exclusive operator area in front of each printer. Therefore, the
printers must be 24 inches/610 mm + 24 inches/610 mm +12
inches/305 mm apart: the entire operator space for each printer
plus the shared general service area of 12 inches/305 mm.
1-12 XEROX 4890 HIGHLIGHT COLOR LPS INSTALLATION PLANNING REFERENCE