Filter
Top Products
PREINSTALLATION
Power cables Outlets that meet the electrical requirements as outlined in the
“Environmental and electrical requirements” section in this
chapter must be within reach of the power cables, as listed
below. If equipment is installed in a raised-floor environment,
consider reducing the useable length of cable. The following list
indicates the cable limitations.
• System controller: 15 feet/4.6 m
• Printer: 15 feet/4.6 m
• Dual tape drive option: 15 feet/4.6 m
• Keyboard/display: 15 feet/4.6 m
The system controller provides an outlet for the keyboard and
display power cord.
Cable locations
To run the cables beneath the flooring effectively, it is necessary
to know where the cables enter and exit the printer, the system
controller, and the peripheral cabinet. Figure 1-9 shows those
locations (marked with an X).
Figure 1-9. Top view of power and data cable lengths
On the optional peripheral cabinet and the controller, the power
cords enter from the bottom rear of the frames. The opening is
in the middle.
XEROX 4890 HIGHLIGHT COLOR LPS INSTALLATION PLANNING REFERENCE 1-15