Filter
Top Products
PREINSTALLATION
determine the type of plug and receptacle to use with your 50
Hz printer and system controller.
Table 1-5. System controller and peripheral cabinet power
receptacle requirements
Electrical
environment
Voltage Current Receptacle
U.S. and Canada 60 Hz 208/240, 1 Phase
or 208/220 (L1-L2)
15A - Cabinet
15A - Controller
NEMA 6-15R or ANSI
C73, 20R
International 50 Hz 220/230 1 Phase 15A - Cabinet
15A - Controller
Per local code
Table 1-6. Printer power receptacle requirements
Electrical environment Voltage and current Receptacle
U.S. and Canada 60 Hz 120/240/30A or
120/208/30A
NEMA 14.30 R
International 50 Hz DELTA 220, 230, 240 / 30A
(DELTA),
3 Phase, 4 wire
Per local code
50 Hz system controller and peripheral cabinet power cord configurations
Figure 1-11 shows the 50 Hz system controller power cord
configuration.
Figure 1-11. System controller and peripheral cabinet
power cord 50 Hz Installation 220/230 VAC,
single phase, 15A cabinet, 15A system
controller
Measurement Nominal Range
Line to line 220 VAC
240 VAC
176-242 VAC
176-242 VAC
Line to ground 220 VAC
240 VAC
176-242 VAC
176-242 VAC
The 50 Hz plug and receptacle specifications vary according to
local codes.
XEROX 4890 HIGHLIGHT COLOR LPS INSTALLATION PLANNING REFERENCE 1-21