Filter
Top Products
PREINSTALLATION
1/4 inch cartridge tapes
Cartridge tapes are required for the 1/4 inch cartridge tape drive.
The 1/4 inch cartridge tape holds between 320 and 525 MB,
depending on the configuration.
Space planning templates
The dimensions and space requirements for LPS components are
listed earlier in this chapter. The space planning templates are
designed to simplify the space planning process by helping you
create a floor plan for your LPS base components, particularly if
you will have shared clearance space.
Templates are provided for the system controller, optional
peripheral cabinet, and the various printer configurations. Make
sure you allow space for optional equipment as appropriate.
Remember to consider other pieces of equipment, such as
storage cabinets and tables, as well as posts, building columns,
and other immovable objects when planning space for your LPS.
Your site representative can help you plan space for additional
components.
The easiest way to use the space planning templates is to
photocopy them and cut out and move the templates around on
the grid (located at the end of this chapter) to find the optimum
placement for your LPS components. You can also photocopy
the templates onto a transparency and use the transparency on
top of the grid.
The templates are to scale with the grid; each square is equal to
1 foot/250 mm. The curved dotted lines in the corners of the
space perimeters indicate the corners that may be rounded off
while still maintaining the required clearance space.
There are a number of factors to keep in mind when planning
your site. These include:
• Clearance space requirements
• Cable length
• Efficiency of use.
XEROX 4890 HIGHLIGHT COLOR LPS INSTALLATION PLANNING REFERENCE 1-31