Filter
Top Products
PREINSTALLATION
Figure 1-13 shows the configuration of the 60 Hz system
controller and peripheral cabinet power cord configuration.
Figure 1-13. System controller and peripheral cabinet
power cord 60 Hz installation for 15 amp
NEMA 6-15R
Voltage to ground is shown for troubleshooting.
Interface requirements
This section describes requirements for the various interface
environments.
Channel-attached
For an online configuration with an IBM host system, you must
supply the following cables:
• Bus and tag cables (bus in, bus out, tag in, tag out)
• Emergency power off (EPO) cable (optional)
• Terminators (if necessary, due to location on channel).
For your convenience, it is possible to purchase the Bus and Tag
cables for the printer through Xerox or Rank Xerox Corporation.
Contact your Xerox or Rank Xerox site representative for current
pricing and order information.
Third party connections
Xerox or Rank Xerox supports a number of third party
connections. For product recommendations and ordering
information, contact the Xerox Connection (U.S. only), or your
Rank Xerox representative. Refer to the back of the book for
information regarding the Xerox Connection.
XEROX 4890 HIGHLIGHT COLOR LPS INSTALLATION PLANNING REFERENCE 1-23