Filter
Top Products
Xerox 490/980 Color Continuous Feed Printing System CMS Option Tool
Color Management Guide 2-9
Specify data file
Use this option to select a data file to be applied to the desired printer. If you are using a duplex
configuration, the first printer is referred to as [Upstream], the second printer is referred to as
[Downstream].
Use the following information to select the correct data file.
Upstream printer
• For Halftone Dot: Select [Browse] to specify the halftone dot data for the printer. The file
will be named *.ht
•For Error Diffusion: Select [Browse] to specify the error diffusion data for the printer. The
file will be named *.ed
Downstream Printer
• For Halftone Dot: Select [Browse] to specify the halftone dot data for the printer. The file
will be named *.ht
•For Error Diffusion: Select [Browse] to specify the error diffusion data for the printer. The
file will be named *.ed
Resource set at destination
Select the desired resource to be used as a color resource when downloaded for printing.
Execute
Select this option to generate calibration data.