Filter
Top Products
Color Calibration Using ColorPort Utility Software Xerox 490/980 CCF Printing System
6-2 Color Management Guide
Color Calibration
Before performing color calibration, set the cutter to A3 and ensure that all color settings for
both printers are set at 4 (C,M,Y,K).
1. Select the CMS Option Tool icon from the PC-GUI.
2. Select the [Print Colorimetric Pattern] tab.
3. Select the colorimetric pattern to print from the pull-down menu. For Calibration, select
(Eye-One iSis).
4. Select [Print].
5. Select [Yes] to continue. After printing is complete, select one sample of the following test
patterns and cut around the dotted lines neatly:
Test Pattern Na mes
For Upstream Halftone Dot
EyeOneiSis_up_Calib.rnd_1 (299)
EyeOneiSis_up_Calib.rnd_2 (299)
EyeOneiSis_up_Calib.rnd_3 (299)
For Downstream Halftone Dot
EyeOneiSis_dn_Calib.rnd_1 (299)
EyeOneiSis_dn_Calib.rnd_2 (299)
EyeOneiSis_dn_Calib.rnd_3 (299)
For Upstream Error Diffusion
EyeOneiSis_up_Calib.rnd_1 (299)
EyeOneiSis_up_Calib.rnd_2 (299)
EyeOneiSis_up_Calib.rnd_3 (299)
For Downstream Error Diffusion
EyeOneiSis_dn_Calib.rnd_1 (299)
EyeOneiSis_dn_Calib.rnd_2 (299)
EyeOneiSis_dn_Calib.rnd_3 (299)