Filter
Top Products
Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System
5-30 Color Management Guide
Apply a Calibration TRC to existing
Queues using the User TRC option
For the queues that you would like calibrated, follow this procedure.
For Simplex Systems
1. On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2. Double-click on an existing print queue from the list.
3. Select the [Color] tab.
4. In the Color Characteristics (Upstream) box, select [Setting].
5. Under the User TRC drop-down menu, select the [Upstream.trc] file that was created
previously.
6. Select [OK].
7. Select [OK] again.
For Duplex Systems
1. On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [Queue Management].
2. Double-click on an existing print queue from the list.
3. Select the [Color] tab.
4. In the Color Characteristics (Upstream) box, select [Setting].
5. Under the User TRC drop-down menu, select the [Upstream.trc] file that was created
previously.
6. Select [OK].
7. In the Color Characteristics (Downstream) box, select [Setting].
8. Under the User TRC drop-down menu, select the [Downstream.trc] that was created
previously.
9. Select [OK] again.