Filter
Top Products
Color Calibration Process for v1.1.6 Software Xerox 490/980 Color Continuous Feed Printing System
5-12 Color Management Guide
Use ColorPort to Measure Targets
This is to measure the printed test grids using the ColorPort Utility Software.
1. Open the ColorPort Utility Software (v1.5.4).
2. Select the [Measure Target tab].
3. Under the Target drop-down menu, select [ATCN_iSis].
4. Under the Measurement Device drop-down menu, select [X-Rite Eye-One iSis].
5. Select [Connect] and wait for the Eye-One iSis to be ready.