Filter
Top Products
Pre-Calibration Engine Density Adjustment Xerox 490/980 Color Continuous Feed Printing System
4-2 Color Management Guide
Create an Empty Color Resource
In order to perform the pre-calibration engine density adjustment, a Color Resource must be
created with no calibration data associated with it. This is because we want to simulate native
engine performance. Follow these steps to create an Empty Color Resource. There is a separate
procedure for Simplex Systems and for Duplex Systems.
For Simplex Systems
1. Ensure that the Xerox 490/980 Color Continuous Feed Printing System is powered on and is
connected to the PC-UI.
2. On the left-side navigation pane of the Xerox 490/980 Color Continuous Feed Printing
System PC-UI, select [CMS Option Tool].
3. Select the [Paper Information] tab.
Note
Ensure that [Downloading with Calibration] is not selected.
4. Under the Paper Name field, select [Plain Paper] for PRINTER1.
5. Select [Properties].