Filter
Top Products
DocuColor 5000AP Administrator Guide
3-10
3. Profiles
18. Evaluate the test prints by holding your 2 Sided output at
eye level near a light source. This will allow you to see the
registration marks for both Side 1 and Side 2 of the output.
a. If you determine that the registration between Side 1
and Side 2 is unacceptable and needs adjusting,
repeat this procedure starting at Selecting the
Registration options.
TIP: You may need to repeat this procedure numerous times until
you achieve acceptable output prints.
b. If the printed output for both Sides 1 and 2 is
acceptable, select OK to save and close the Profiles
window.
NOTE: Once you have selected OK to save and close the Profiles
window, the new profile procedure (for example,
AlignmentProfile2) can be selected from the Tray Properties
window whenever you want to run a job using this profile.
19. If you are editing an existing Alignment profile:
a. From the Profiles window, Alignment tab, select the
desired profile.
b. Click the Edit button.
c. Repeat this procedure starting at Selecting the
Registration options.