Filter
Top Products
DocuColor 5000AP Administrator Guide
3-15
3. Profiles
10. If required, select an Alignment Profile from the pull-down
menu.
TIP: The default setting is Use Tray Properties. It is
recommended that you leave this option at its default setting until
you run test prints and evaluate the output of the prints. Test Print
is discussed in more detail in Step 16.
NOTE: If you select a specific Alignment Profile, the Profiles
Properties button becomes accessible. By clicking on this button,
the UI opens the Alignment Profile window for the selected profile,
and you can edit that Alignment Profile if necessary.