Filter
Top Products
DocuColor 5000AP Administrator Guide
3-39
3. Profiles
6. In the Decurler Profile Properties window, you can give the
Custom Decurler Profile a new name. In this example we
rename the Custom Decurler Profile to Custom 1.
7. In the Decurler Profile Properties window, enter the
following values in the All Weights Rated Speed, 1 Sided:
Face Up fields:
• Since your job shows downward curl, you do not want to
use the Upward Decurler. As a result, in the Upward
fields you must enter values in descending order, or in
equal values less than 12% (the next value you will
enter). For this exercise we will use 0%, 0% and 0%.
• In the Downward 2 mm (Light curl) field enter 12%. This
means that all pages with a 0% through 12% image
density ratio, which includes the Dunn Report maximum
of 10.8%, will be sent to the 2 mm downward Decurler
path.
• In the Downward 6 mm (Medium curl) field, enter 30%.
This means that all pages with 13% to 30% image
density ratio, which includes the Tulips 28.8%, will be
sent to the 6 mm downward Decurler path.
• In the Downward 10 mm (Heavy curl) field, enter 50%.
Since none of your job pages have 31% through 50%
image density ratio, this Decurler will not be used.
NOTE: Remember, all fields have to be considered
(Downward and Upward) when entering Custom Decurler
Profile values.
The following screen shows how the values would be entered: