Filter
Top Products
DocuColor 5000AP Administrator Guide
3-30
3. Profiles
6. Check the output for curl.
a. If the curl is eliminated, you are finished. Continue
running your prints using the specific Decurler A-D
setting.
b. If the curl is still persistent, try another Decurler Paper
Type (A-D).
c. If the curl continues after using each
Decurler Paper
Type A-D setting, continue to the Custom Decurler
Profile procedure.
NOTE: If a decurler profile is changed, it remains at that setting
until changed again manually. As an example, if you decide to use
the B decurler setting, the setting will remain at B until you change
it to another setting.
Custom Decurler Profiles
While the system is programmed to correct for curl under most
conditions, there may be instances where the pre programmed
settings (System Default and A-D) may not meet your curl
requirements. Using Custom Decurler Profiles allows you to enter
an image density ratio range to help eliminate curl.
NOTE: The examples that follow are designed to give you an
understanding of programming the Custom Decurler Profile option
to obtain optimal results, but due to various job stock and
environmental conditions the manner in which you achieve the
best results may vary.
The most important aspect for creating a Custom Decurler Profile
is determining the image density ratio on the curled paper. A
sampling of image density ratio on some typical customer
documents follows.