Filter
Top Products
DocuColor 5000AP Administrator Guide
3-34
3. Profiles
Entering values in the Custom Decurler Profile fields
IMPORTANT! It is important to understand that when entering
image density ratio values within the Decurler Profile Properties
window that the maximum allowed entry is 100%.
When determining what values to enter, do not total all CMYK
image density ratios, but instead determine the largest CMYK
image density ratio value. Take a look at the following examples
for further explanation:
• If your job contains image density ratios of 100% cyan, 100%
magenta, 100% yellow, and 100% black, the maximum image
density ratio value is 100%. If your job contains 100% cyan,
20% magenta, 20% yellow, and 20% black, the maximum
value is still 100%.
• If your job contains image density ratios of 50% cyan, 50%
magenta, 50% yellow, and 50% black, the maximum image
density ratio value is 50%. If your job contains 50% cyan, 10%
magenta, 10% yellow, and 10% black, the maximum value is
still 50%.
• Consider the Carousel Horses image density ratios shown
below. When entering image density ratio values to control
curl, you will use the black 30.5% value, not the combined total
of all CMYK values.
Image Density Ratios
Carousel Horses
Black 30.5%
Magenta 28.1%
Cyan 23.8%
Yellow 29.5%