Filter
Top Products
DocuColor 5000AP Administrator Guide
3-28
3. Profiles
Decurler A-D Profile settings
If paper curl is a problem, using one of the preset Decurler A-D
Profile settings usually eliminates the problem. However, due to
the broad range of paper variables, image coverage, and
environmental factors, these default settings may not result in
satisfactory performance.
Visit the www.xerox.com
web site and refer to the latest
Recommended Materials List (RML) for your digital press:
• To determine if Xerox has tested your paper type and weight
• View the recommended Decurler A - D Profile settings for
particular paper types.
NOTE: The settings recommended in the in the “Recommended
Materials List for DocuColor 5000” were developed from testing a
wide range of paper samples, toner area coverages, and
environments. The outcome of this testing is the preset
parameters shown in the list, and these parameters refer to how
particular papers interact with the digital press decurling system.
Decurler A-D Profile procedure
If after using the System Default setting paper curl is still
unacceptable, select an alternate Decurler Type A - D Profile
setting:
1. At the controller, logon as Administrator.
a. Select the Logon button.
b. Select Administrator and enter a password.
c. Select [OK].