Filter
Top Products
DocuColor 5000AP Administrator Guide
3-18
3. Profiles
TIP: The default setting Use Tray Option. It is recommended that
you leave this option at its default setting until you run test prints
and evaluate the output of the prints. Test Print is discussed in
more detail in Step 16.
NOTE: Refer to page 3-25 for information on the Paper Tray Air
Assist.
14. Load your custom paper in the desired paper tray.
15. Ensure that you select the correct paper information in the
Tray Properties window (size, weight, type). From the Type
pull-down menu, select the correct Custom Paper Profile.
16. Select the Test Print button; a new window opens.
a. Select the 2 Sided button.
NOTE: If you want to check the registration for 1 Sided
prints only, select the 1 Sided button.
b. Select 10 test prints by clicking the Up arrow button to
change the number of test prints generated.
c. Select the desired paper tray from the pull-down list.
d. If necessary, select the Tray Properties button and
make any desired settings.