Filter
Top Products
DocuColor 5000AP Administrator Guide
3-35
3. Profiles
Within the Decurler Profile Properties window, you must enter
Decurler values in ascending or descending order. If you do not
enter values in ascending or descending order, the following
screens display, which informs you to reenter the values correctly.
In the following example, 100% was followed by 80% and 90%,
respectively. The correct sequence would need to be 100%,
followed by 90% and then 80%. The conflicting values are
highlighted in red.
The exercise on the following pages will show you an example of
how to enter Decurler values correctly.