Filter
Top Products
85
3.8 System Parameter Setup (Print Services on Web, 6030/6050)
Procedure
1 Start Print Services on Web, log in as Administrator, and display the
[Properties] tab.
Job Recovery Determines how the jobs that were in the print queue
when the printer power was shut off will be processed
when the printer is switched back on. The default
setting is [OFF].
[OFF] Jobs that had not been output when
the power was shut off are canceled
(not printed).
[QUEUED] Prints out only the [Queued] jobs
waiting to be processed.
[ALL] Prints out all jobs that have not been
successfully completed.
• When [ALL] is selected, a ten-page job will be
reprinted from page one when the power is
restored, even if pages 1 to 9 had already printed
before the power was shut off.
• The sequence in which jobs are printed after the
power is restored is based on the ID numbers
that were assigned when each job was received.
Exclusive access
time out
(Net Cont. Time)
Not available
Extension Sets up the extension that will be used to identify the
format of each file. The extension is a maximum of
eight alphanumeric characters (upper case or lower
case) in length.
A maximum of 32 extensions can be saved.
Set Date Sets up the internal clock. The parameters are set in
the order year, month, day, hour, and minutes.
Menu Item Description