Filter
Top Products
229
6.3 Registering the Xerox 6050A Wide Format Printer System
Registering the Remote Printer
For printing using the lpr command, both the host system and the remote printer
must be registered on the client workstation.
Although the registration information depends on the system, the logical device
names on the workstation must correspond with the logical printers on the Xerox
6030/6050 Wide Format printer system.
SunOS 5.X
For SunOS 5.X, register the remote printer using the lpadmin command.
• Executing the lpadmin command
In the example below, the 6050A with the host name [oklahoma] is registered.
In contrast to the 6030/6050 with its plt00h, etc., the queue names for the 6050A
with the Accxes controller
are always given the name of [raw].
In this example, the printer device [oklahoma] is created new and set up.The
queue [raw] will be used to accept jobs.
Refer to the "Main Printing Functions" section in "2.1 Overview of the 6030/
6050/6050A Wide Format Printer" for logical printer.
You need to have root user privileges to use the lpadmin command.
For details of the lpadmin command, see SunOS 5.X User Guide.
#lpadmin -p oklahoma -s oklahoma!raw
If csh is used, enter "\!" instead of "!" in the above to prevent the character "!"
and subsequent characters from being replaced by the command log.
You can register the remote printer using the admintool prepared by SunOS.
To register the remote printer, select the menu [Printer Manager] > [Edit] >
[Add Printer] > [Add Access to Remote Printer]. Specify a logical printer name
raw in Printer Name, a host name 6050 WF in Printer Server, and BSD in Print
Server OS.