Xerox 632 Scanner User Manual


 
Installation
10 DocuMate 632 Scanner User’s Guide
8. Select the option you want.
Full Install (OneTouch, TWAIN and ISIS)—This is the
recommended installation. It installs the One Touch 4.0
software which provides the necessary driver software for
the scanner. It also installs scanning interfaces for the
TWAIN and ISIS drivers. Installing this option means that
you can use several different methods to scan, as
explained in this User Guide.
TWAIN and ISIS—The TWAIN and ISIS drivers are
installed. The One Touch 4.0 Monitor will not run and you
cannot use the One Touch features. You can use the Xerox
DocuMate 632 TWAIN driver to scan from other TWAIN
applications. You can also scan from applications that use
the ISIS driver. You will not be able to invoke the
functionality of the buttons on the scanner.
TWAIN only—The TWAIN driver is installed without the
One Touch 4.0 software or the ISIS driver. You can use the
Xerox DocuMate 632 TWAIN driver to scan from TWAIN
applications. You will not be able to scan with the buttons
on the scanner.
ISIS only—The ISIS driver is installed. You can use
applications that use the ISIS driver such as Kofax and
QuickScan. The One Touch 4.0 Monitor will not run and you
cannot use the One Touch features. You will not be able to
use the Xerox DocuMate 632 TWAIN driver. You will not be
able to scan with the buttons on the scanner.
NOTE: If your computer is running Windows XP or Windows
Vista, Microsoft’s Windows Image Acquisition (WIA) interface for
scanning is always available, regardless of the option you select.
NOTE: If you decide to change your scanner’s installed drivers
later on, you must first uninstall the drivers the scanner is
currently using. See “Install Another Driver” on page 116.