Filter
Top Products
Windows 2000/XP Network
Phaser® 8200 Color Printer 26
2. Verify that the client is logged into the network and printing to the correct print queue. Also verify
that the user has access to the Phaser printer queue.
3. From the server desktop, use the right-mouse button and select My Network Places. Use the
right-mouse button to select Properties from the cascade menu. Select Local Area Connection.
4. The Local Area Connection Properties dialog should appear. Select the Configuration tab.
5. Check the list of installed network components for AppleTalk Internet Protocol.
6. As required, install any components not listed and restart the system.
7. Once rebooted, select the Start button and Settings, then select the Printers folder. The Printers
window should appear.
8. Right-mouse-click on the printer icon and select Properties.
9. Select the Advanced tab. Verify that you have selected the correct driver for your printer.
10. Select the Ports tab.
11. Verify the AppleTalk name in the Print to the following ports list. If necessary, re-select the
correct name or, if not listed, Add a new port, selecting the Zone, then the name, from Steps 1 and
2 above.
12. Click on the General tab, then click Print Test Page. If printer still does not print, access
PhaserSMART from the Troubleshooting tab of your printer driver or refer to the Xerox web site
at www.xerox.com/officeprinting/support
.