Filter
Top Products
Connecting the Projector
8 Xerox DP 820 User’s Guide
Connecting the Projector to an S-Video Source
The typical connection for an S-Video source is a professional-
quality DVD, Video Disc, or Videotape player with an S-Video
output port.
1. Make sure the projector and video source device are turned off.
2. Plug the S-Video cable into the S-Video port on the video
source device, and then into the S-Video port on the projector.
3. Plug the red and white connectors on the Audio cable into the
corresponding red and white ports on the video source. Then
plug the other single end of the cable into the Audio port on the
projector.
4. Do NOT plug the yellow connector into the projector or the
video source device.
The audio will play through the projector’s built-in audio
speaker.
5. Plug the power cord into the projector and then into an
electrical outlet.
6. Turn on the projector first, and then the video source.
7. If you don’t see an image, or if you have multiple video sources
connected to the projector simultaneously, press the Source
button on the projector’s control panel, or remote control, to
switch to the input source.
Audio Cable
S-Video Cable